580-42 duals, fixed CM feeder house, pro drive, variable stream rotor, power cast tailboard, leather, 28.5ft auger
Information
- Combine Type:Small Grain
- Axle:2WD
- Duals/Singles:Duals
- Options:Contour Master (Lateral Tilt Feederhouse)
- Header:No
- Small Grains Package
- Premium Cab
- LED Lighting Package & Header Extremity Lights
- Generation 4 CommandCenter 10 in. Color Display with Extended Monitor - 4600 Processor
- CommandCenter Premium Activation
- Combine Advisor Package
- ActiveYield PLUS Moisture and Yield Sensors
- ProDrive Transmission with Harvest Smart Feedrate Control
- 2-Wheel Drive
- 110 kw Heavy Duty Dual Tilt Cylinders, Fixed Speed Drive - 3.15 In. (80 mm) Lift Cylinders w/ Fore Aft Tilt
- Small Wire Concave
- Dyna-Flo Plus Cleaning Shoe General Purpose Dual Adjust Chaffer and Sieve with TouchSet (Electric Shoe Adjust)
- Variable Stream Rotor Configuration Regular Wear
- Regular Wear Grain Handling System
- Power Folding Grain Tank Covers
- 28.5 Ft. (8.7M) Unloading Auger
- Deluxe Residue - In-cab operator controlled PowerCast Powered Tailboard with wind compensation
- 620/75R26 R1W 166A8 (Goodyear Only) or 23.1R26 166A8 R1 (Firestone Only)
- 580/85R42 R1W Duals 166A8 (Goodyear or Firestone)
- Final Tier 4 Certified Engine
- Camera Ready
- Heavy Duty Separator Grates
- Factory Installed Air Compressor
- Engine Coolant Heater - 110 Volt (Not available for Export)
- Additional "Full" Grain Tank Sensor
Highlights
- $331,700.00
- KILLARNEY
- Pre-Owned
- 2018
- John Deere
- S770
- 1H0S770SKH0800014
- Available
- Feeding: 1397 mm (55 in)
Specifications
- 2018
- John Deere
- S770
- Base
- General
- John Deere 6 cyl. 9.0 L
- 9.0 L/cu (548 in.)
- Air-to-Air Aftercooler
- 2200 rpm
- @ Rated Speed - T4: 292 kW (391 hp) | Boost @ Rated Speed T-4: 317 kW (425 hp) | @ -100 rpm Rated Speed T-4: 313 kW (419 hp) | Peak @ -200 rpm Rated Speed T-4: 335kW (449 hp) | @ Rated Speed NON-iT4: 278 kW (373 hp) | Boost @ Rated Speed NON-iT4: 25 kW (34 hp) | @ -100 rpm Rated Speed NON-iT-4: 297 Kw (398 hp) | Peak @ -200 rpm Rated Speed NON-iT4: 317 kW (425 hp)
- type: FFixed or Variable or MultiSpeed
- conveyor slat: Cast Iron
- Rotor Range: 210-1000 rpm | Cleaning fan: 620-1350 rpm
- Concave area: 1.1 m2 (1705 in2)
- Feeding: 1397 mm (55 in)
- Feeding: 1727 mm (68 in) | Unloading Auger: 6.9 m (22.5 ft) , 7.9 m (26 ft) or 8.7 m (28.5 ft)
- 3124 mm (123 in)
- 762 mm (30 in)
- 1.54 m2 (2390 in2)
- 2.5 m2 (3824 in2) | Front: 0.5 m2 (801 in2)
- 2.1 m2 (3255 in2)
- Total: 5.1 m2 (7905 in2)
- 950 lt (250 gal)
- Grain Tank Size: 10600 Lts (300 bu) | Unloading Rate: 116.3 Lt/sec (3.3 bu/sec)
- Grate Area: 0.36 m2 (555 in2)
- Feed Accelerator, Stone Trap (FAST): Std. | Feeding Reverser: std.
- Rotary
- 1328