2018 John Deere S770

580-42 duals, fixed CM feeder house, pro drive, variable stream rotor, power cast tailboard, leather, 28.5ft auger
MoreLess
Limited Time Offer!

Selling Price -$331,700.00

  • Combine Type:Small Grain
  • Axle:2WD
  • Duals/Singles:Duals
  • Options:Contour Master (Lateral Tilt Feederhouse)
  • Header:No
  • Small Grains Package
  • Premium Cab
  • LED Lighting Package & Header Extremity Lights
  • Generation 4 CommandCenter 10 in. Color Display with Extended Monitor - 4600 Processor
  • CommandCenter Premium Activation
  • Combine Advisor Package
  • ActiveYield PLUS Moisture and Yield Sensors
  • ProDrive Transmission with Harvest Smart Feedrate Control
  • 2-Wheel Drive
  • 110 kw Heavy Duty Dual Tilt Cylinders, Fixed Speed Drive - 3.15 In. (80 mm) Lift Cylinders w/ Fore Aft Tilt
  • Small Wire Concave
  • Dyna-Flo Plus Cleaning Shoe General Purpose Dual Adjust Chaffer and Sieve with TouchSet (Electric Shoe Adjust)
  • Variable Stream Rotor Configuration Regular Wear
  • Regular Wear Grain Handling System
  • Power Folding Grain Tank Covers
  • 28.5 Ft. (8.7M) Unloading Auger
  • Deluxe Residue - In-cab operator controlled PowerCast Powered Tailboard with wind compensation
  • 620/75R26 R1W 166A8 (Goodyear Only) or 23.1R26 166A8 R1 (Firestone Only)
  • 580/85R42 R1W Duals 166A8 (Goodyear or Firestone)
  • Final Tier 4 Certified Engine
  • Camera Ready
  • Heavy Duty Separator Grates
  • Factory Installed Air Compressor
  • Engine Coolant Heater - 110 Volt (Not available for Export)
  • Additional "Full" Grain Tank Sensor
  • 2018
  • John Deere
  • S770
  • Base
  • General
  • John Deere 6 cyl. 9.0 L
  • 9.0 L/cu (548 in.)
  • Air-to-Air Aftercooler
  • 2200 rpm
  • @ Rated Speed - T4: 292 kW (391 hp) | Boost @ Rated Speed T-4: 317 kW (425 hp) | @ -100 rpm Rated Speed T-4: 313 kW (419 hp) | Peak @ -200 rpm Rated Speed T-4: 335kW (449 hp) | @ Rated Speed NON-iT4: 278 kW (373 hp) | Boost @ Rated Speed NON-iT4: 25 kW (34 hp) | @ -100 rpm Rated Speed NON-iT-4: 297 Kw (398 hp) | Peak @ -200 rpm Rated Speed NON-iT4: 317 kW (425 hp)
  • type: FFixed or Variable or MultiSpeed
  • conveyor slat: Cast Iron
  • Rotor Range: 210-1000 rpm | Cleaning fan: 620-1350 rpm
  • Concave area: 1.1 m2 (1705 in2)
  • Feeding: 1397 mm (55 in)
  • Feeding: 1727 mm (68 in) | Unloading Auger: 6.9 m (22.5 ft) , 7.9 m (26 ft) or 8.7 m (28.5 ft)
  • 3124 mm (123 in)
  • 762 mm (30 in)
  • 1.54 m2 (2390 in2)
  • 2.5 m2 (3824 in2) | Front: 0.5 m2 (801 in2)
  • 2.1 m2 (3255 in2)
  • Total: 5.1 m2 (7905 in2)
  • 950 lt (250 gal)
  • Grain Tank Size: 10600 Lts (300 bu) | Unloading Rate: 116.3 Lt/sec (3.3 bu/sec)
  • Grate Area: 0.36 m2 (555 in2)
  • Feed Accelerator, Stone Trap (FAST): Std. | Feeding Reverser: std.
  • Rotary
  • 1328
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $331,700.00
  • KILLARNEY
  • Pre-Owned
  • 2018
  • John Deere
  • S770
  • 1H0S770SKH0800014
  • Available
  • Feeding: 1397 mm (55 in)
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.